Endress+Hauser at a glance.
We are a leading supplier of products, solutions and services for industrial process measurement and automation. We offer comprehensive process solutions for flow, level, pressure, analysis, temperature, recording and digital communications across a wide range of industries, optimizing processes with regards to economic efficiency, safety and environmental protection.
Flow measurement for liquids, gases and steam:
Product overview for applications in liquids, gases and steam.
Consistent product quality, safety, process optimization and environmental protection – these are only a few reasons why industrial flow measurement is becoming more important all the time. Water, natural gas, steam, mineral oil, chemicals are some of the fluids that have to be measured day in, day out. There is no single, across-the-board technology suitable for all these applications, so you can choose the flowmeter best suited to your process needs from our comprehensive product basket.
From the communication-capable single measuring point to the complete solution for higher-level control systems: you can always rely on the fact that we customize our products to your process requirements.
Together with automated process control and state-of-the-art communication interfaces (fieldbus systems), flow metering has advanced into more and more new fields of application in recent years.
You can choose among various measuring principles – electromagnetic measuring of volume flow, mass flow based on either the Coriolis or thermal principle, measuring of volume flow based on the vortex or ultrasonic principle.
Continuous level measurement and point level detection in liquids and bulk solids. Constant product quality, plant safety and economic efficiency – these are important aspects for any level measuring point. Levels in liquids, pastes, bulk solids or liquefied gases are often measured in tanks, silos or movable containers. For continuous, interface and density measurement as well as for point level detection a broad range of measuring principles is available. Endress+Hauser supports you from planning through commissioning and also maintenance of your measuring point.
For every measuring task the right solution.
As world market leader in level measurement, Endress+Hauser guarantees asset protection.
Worldwide support and service.
Know-how for the entire life cycle of your product.
Powerful instruments for process pressure, differential pressure, level and flow. Whether pressure, level or flow, today pressure measurement technology is often used for measuring liquids, pastes and gases. With a wide range of sensor technology Endress+Hauser offer instruments with perfect fit for any kind of application.
For every measuring task the right solution.
As one of the leading suppliers in pressure measurement, Endress+Hauser guarantees asset protection.
Worldwide support and service.
Know-how for the entire life cycle of your product.
Thermometers and transmitters for the process industry. Endress+Hauser offers a complete assortment of compact thermometers, modular thermometers, thermowells, measurement inserts, transmitters and accessories for all types of process industries such as Oil & Gas, Chemicals, Food & Beverage, Life Sciences, Primaries & Metal, Power & Energy.
Highest plant availability & safety through most reliable sensor technology & traceable, accredited calibrations.
Cost savings & process optimization through fast, robust & highly accurate iTHERM sensors.
Lowest operating expenditures through seamless integration, easy handling and long lifetime.
Trouble-free plant certification through international approvals.
User-friendliness and expert’s support through all stages of the life cycle.
Expertise & Innovation To Deliver Proven Results
Emerson Process Management is the automation innovator with the depth of expertise and breadth of technologies to take on our customers’ toughest challenges and bring predictable success anytime, anywhere.
Measurements that flow to the bottom line.
Accurate level, pressure, temperature, and flow measurements help you reduce uncertainty. Oil & gas producers, for example, use our Daniel technology to solve tough custody transfer problems.
Guided Wave Radar.
Magnetic Level Indicator.
Marine Tank Measurement.
Integrated Metering Systems.
Level and pressure instrumentation for the process industry
VEGA Grieshaber KG is a global manufacturer of process instrumentation. Its product portfolio includes sensors for measurement of level, point level, pressure as well as equipment and software for integration into process control systems.
Measuring techniques for continuous level measurement:
In continuous level measurement, the level of a medium in a tank or silo is detected with the help of different measuring methods and converted into an electronic signal. The level signal is either displayed directly on site or incorporated into a process control or management system. Typical applications for continuous level measurement are process tanks, storage tanks or silos in the process industry.
The measured media are: liquids – pastes – powders – bulk solids
Guided Wave Radar
Signal conditioning instruments
Housing and components
Protective and separating instruments
General mounting elements
Mounting elements VEGA sensors
WIKA – At a glance
As a family-run business acting globally, with over 8,500 highly qualified employees, the WIKA group of companies is a worldwide leader in pressure and temperature measurement. The company also sets the standard in the measurement of level and flow, and in calibration technology. Founded in 1946, WIKA is today a strong and reliable partner for all the requirements of industrial measurement technology, thanks to a broad portfolio of high-precision instruments and comprehensive services.
High technological and service performance.
With manufacturing locations around the globe, WIKA ensures flexibility and the highest delivery performance. Every year, over 50 million quality products, both standard and customer-specific solutions, are delivered in batches of 1 to over 10,000 units. With numerous wholly-owned subsidiaries and partners, WIKA competently and reliably supports its customers worldwide. Our experienced engineers and sales experts are your competent and dependable contacts locally.
Electronic pressure measurement.
Mechatronic pressure measurement.
Mechanical pressure measurement.
Electrical temperature measurement.
Mechatronic temperature measurement.
Mechanical temperature measurement.
Measurement via communicating chambers
Continuous in-tank measurement
Measurement of switching points in the tank
Submersible pressure transmitters
Primary flow elements:
Calibration technology for pressure
Calibration technology for temperature
Calibration technology for current, voltage, resistance
Valves and protective devices
Cables and connectors
Controllers and indicators
Power supply and control units
Diaphragm seal accessories
Calibration technology accessories
KTS Electronic develops newest search technologies, produces precise high quality metal detectors – made in Germany – and delivers to customers worldwide. Private treasure hunters and relic hunters use them as relic detectors or even as coin detectors and professional gold seekers for example use our special gold detector machines as a gold nugget detector. Industrial enterprises apply our detectors with success and profit.as well.
GPA 1000: The new GPA 1000 Model 2016 has modern high performance sensors and is provided with the new “GPA Visualizer” 3D software. The GPA 1000 is offered in a set with GOLD SCAN II as an additional metal detector for gold and metal discrimination. The best 3D gold detector 2016 is also a ground scanner and uses the high depth performance of the GPA technology for professional treasure hunting.
GPA DUO-XL – Two gold-seeking technologies in one device. GPA DUO-XL V16 is the economical alternative to our top device GPA 1000 and also developed and manufactured in Germany by KTS-Electronic.
GOLD SCAN II – The best Gold Detector machine, developed and manufactured in Germany.
KTS-Electronic presents the successor of the GOLD SCAN 3D gold detector, which is known worldwide. With over 20 years of experience, production, distribution and a worldwide use of the company’s gold detectors and metal detectors KTS-Electronic disposes of great knowledge, which we took advantage of for the development of our new powerful GOLD SCAN II. With a higher search performance of up to 30 % the new GOLD SCAN II is convincing regarding gold detection and was further developed especially as a gold nugget detector for the search after small gold pieces and nuggets.
PULSE AR III: The PULSE AR III is a professional pi metal detector with metal discrimination and a high sensibility to precious metals. The combi set consits of three different search coils and a search frame, which can help to locate objects in a depth of 5 meters.
PULSE AR II: A compact pulse induction detector for amateur searchers – precision Made in Germany. The PULSE AR II is an affordable metal detector with a maximal search depth of up to 2 meters. The metal search device is particularly suitable for hobby searchers and applicable for the search after small as well as large metal objects. The handling of PULSE AR II is really uncomplicated, previous knowledge or training are not necessary.
Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.
Laser Distance Meters
mA Loop Calibrators
Power and Energy Loggers
Power Quality Analyzers
Vibration and Alignment
Visual IR Thermometers
No path is easy all of the time. That is true for ours too. That’s why we concentrate our team’s capabilities. On the essentials. For us, that means four areas: cable diagnosis, cable fault location, water leak detection and line and object location. As a result of this concentration, we are in the position of being able to recognise our customer’s needs early on and to quickly produce suitable solutions.
Cables are amongst an electricity supplier’s most important assets. Precise knowledge about the current condition of the cables is thus of the utmost importance. Partial discharge diagnosis to evaluate local weak points as well as the integrated diagnosis of the insulation provide the basics for correct maintenance measures and investment decisions. Installation faults are reliably revealed using VLF and DC test systems.
Cable fault location
Faults are the “natural enemy” of reliability. The innovative SebaKMT products make it possible to quickly localise cable faults without causing damage to fault-free parts of the cable.
Water leak detection
For leaks in a pipe network very quick action is required to prevent a large volume of valuable drinking water from being lost. The simple handling and the reliability of SebaKMT technology provide the perfect basis for this.
Line and object location
To locate cables, pipes and metallic objects as well as for sounding out a site and routing lines, SebaKMT offers a complete product range of passive and active location equipment. This ranges from simple metal detectors up to intelligent audio frequency fault location systems.
TV inspection of sewers
The use of sewer pipeline cameras is becoming increasingly important for the protection of our water resources. The requirements of our customers and the results of extensive tests had a great effect on the design and the simple use of the cameras.
Our strategy is to produce all our products with a single brand name, Megger. The advantages to you are that you know the products and software will work well together, and all the products have a similar yet distinctive ‘look and feel’ with their dark and light grey casings. We don’t waste colour on trying to make our test instruments pretty – we reserve it for useful functions such as range selectors and displays. Our design engineers come from many different nations, and they regularly exchange ideas and tips with colleagues from other countries. That means you get the latest innovations, one of the reasons that Megger products are so advanced. As more companies join the Megger family, you may find some test equipment sold by us that have not yet transitioned to the Megger identity system. Don’t worry – our top priority is ensuring that product quality is right. We’ll get round to making sure the colours are the same later.
Electrical test equipment
Battery testing equipment
Complete installation testers
Fault location on cable pairs
Insulating oil testing
Insulation resistance testers > 1 kV
Insulation resistance testers < 1 kV
Loop and RCD test equipment
Low resistance or continuity testing
Motor and generator tester
Multifunction installation testers
Multimeters and clampmeters
Portable appliance testers
Software for testing and maintenance
Utility service and leak detection